15
Language:
English
Model
:
Netti 4U comfort|CED Version: November 2010
netti rullestoler
Language:
English
Model:
Netti 4U comfort|CED
Version:
November 2010
Language:
English
Model
:
Netti 4U comfort|CED Version: November 2010
Language:
English
Model:
Netti 4U comfort|CED
Version:
November 2010
2 pcs. 24 mm open-end spanner.
Make sure that the nut on inside of
frame totally wreathes the wheel
bushing.
Main wheels and front castors should be
mounted according to the description below.
When the seat height is changed ensure
that the front castors are placed so
that the lower frame tube is parallel
with the ground.
Check the position of the anti tip
and readjust the brakes after moun-
ting the main wheels or changing the
6.5 Backrest
• To mount the gas spring, lift the push
bow with one hand, and lead the gas
spring locking head into the plastic
bracket (Ill. 6.5.1).
• Check that the hole in the locking head is
parallel with the open holes in the plastic
bracket.
Ill. 6.5.1.
• Lock the back rest by pushing the locking
bolt through the plastic bracket and
gas spring locking head (Ill. 6.5.2.)
Ill. 6.5.2.
To check that the back rest is
locked, grip the push bow and
press the back rest forward. If
the back rest falls forward -
repeat the locking procedure
or contact your dealer.
• The wheelchair is set to a standard seat
depth, and the plastic bracket has 4 holes
of which three are temporarily blocked with
plastic plugs (Ill. 6.5.3).
24”main
wheel
24"
12" main
wheel
24", 16" and
12" main wheel
24" main wheel
16"
