30
Language:
English
Model
:
Netti 4U comfort|CED Version: November 2010
Language:
English
Model:
Netti 4U comfort|CED
Version:
November 2010
Language:
English
Model
:
Netti 4U comfort|CED Version: November 2010
netti rullestoler
Language:
English
Model:
Netti 4U comfort|CED
Version:
November 2010
8. TRANSPORT
Netti 4U comfort|CED is tested and
approved to crash test ISO 7176-19.
8.1 Folding for transport
When wheelchair is unoccupied, fold as
described below. Put wheelchair in trunk or
back seat. When placed in back seat, secure
frame using safety belt.
• Remove the head support (Chapt. 6.13)
• Turn the anti tips upwards (Chapt. 6.8)
• Remove the foot supports (Chapt. 6.12)
•
Pull out the locking bolt for the back
rest, and place the back rest forward in
the seat (Chapt. 6.5)
• Remove the main wheels (Chapt. 6.2)
• Remove the front castors (Chapt. 6.3)
8.2 Transport in car
It is important to notice that correctional
belt systems used in the chair are not
replacing the need for a safety belt when
transported in a car.
If the head support is mounted correctly
it is very stable but does not replace the need
for an external neck support mounted in the
car.
The chair is marked with stickers in 4 positions,
showing where to fix the straps
netti 4u comfort|CED has been successfully
tested according to the requirement of
IsO 7176-19 using a combined wheelchair
an occupant restraint system W120/DISR
developed by unwin safety systems. For further
information: www.unwin-safety.com
I
n front: use hook or strap attachment.
mount an “eye-bolt” in
one of the holes in the
wheel frame bracket. Hook on a hook/
carabine hook in the “eye-bolt”
Item number 1 pair eye bolts with
bushing: 21074
The angle of the straps should be 0-45
°
