14
Language:
English
Model
:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model
:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model:
Netti 4U comfort|FA
Version:
November 2010
6.4. Seat height adjustment
The seat height at the rear depends on:
• Size of main wheel.
• Position of main wheel.
• Using 24” main wheels in the upper hole,
the seat height is 49.7 cm from the floor
to the seating plate.
• Using 24” main wheels in the next upper
position, the height will measure 53,4 cm
to the seating plate.
• Using 12” and 16” main wheels the seat
height is 47.9 cm from the floor to the
seating plate.
If it is required to change position of the main
wheels or to change to a different size of main
wheels, unfix the hub bushing including washer
and nut. remove the hub bushing and mount it
in the required position.
2 pcs. 24 mm open-end spanner.
Main wheels and front castors should be
mounted according to the description -
next column.
When the seat height is changed ensure
that the front castors are placed so
that the lower frame tube is parallel
with the ground.
Check the position of the anti tip
and readjust the brakes after moun-
ting the main wheels or changing the
main wheel position.
6.5 Backrest
• To mount the gas spring, lift the push
bow with one hand, and lead the gas
spring locking head into the plastic
bracket (Ill. 6.5.1).
• Check that the hole in the locking head is
parallel with the open holes in the plastic
bracket.
Ill. 6.5.1
