32
Language:
English
Model
:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model
:
Netti 4U comfort|FA
Version:
November 2010
Language:
English
Model:
Netti 4U comfort|FA
Version:
November 2010
9. TRANSPORT
Netti 4U comfort|FA is tested and
approved to crash test ISO 7176-19.
9.1 Folding for transport
When wheelchair is unoccupied, fold as
described below. Put wheelchair in trunk or
back seat. When placed in back seat, secure
frame using safety belt
• Remove the head support (Chapt. 6.11)
• Turn the anti tips upwards (Chapt. 6.9)
• Remove the foot supports (Chapt. 6.10)
• Swing the push handles in (Chapt. 6.14)
• Remove the arm support (Chap. 6.12)
• Remove the back cushion (Chap. 7.2)
• Pull out the locking bolt for the back
rest, and place the backrest forward in
the seat (Chapt. 6.5)
• Remove the main wheels (Chapt. 6.2)
• Remove the front castors (Chapt. 6.3)
9.2 Transport in car
If the head support is mounted correctly
it is very stable but does not replace the need
for an external neck support mounted in the
car.
The chair is marked with stickers in 4
positions, showing where to fix the straps
netti 4u comfort|Fa has been successfully
tested according to the requirement of IsO
7176-19 using a combined wheelchair an
occupant restraint system W120/DISR
developed by unwin safety systems. For
further information:
www.unwin-safety.com
I
n front: use hook or strap attachment.
mount an “eye-bolt” in
one of the holes in the
wheel frame bracket. Hook on a hook/
carabine hook in the “eye-bolt”
Item number 1 pair eye bolts with
bushing: 21074
The angle of the straps
should be 0-45
°
Netti 4U comfort|FA has been
crash tested without any power kit
etc. If, at a later point of time a
power kit, stair climber etc. is
mounted this must be dismounted
if the wheelchair is to be
transported
