19
Netti Rullestoler
language:
English
model:
Netti I Comfort
Version:
November 2010
The anti tips are delivered adjusted
according to ordered main wheel
size in standard position. If other
adjustments are carried out, anti
tips have to be adjusted accordingly.
adjusting anti tip
The anti tips must be adjusted whenever
position or dimension of main wheels is
changed. Correctly adjusted anti tips should
be positioned just on the inside of the radius
of the main wheel. Anti tips are adjusted as
follows:
• Unfix the locking clamp on the anti tip bar
using an Allen key.
• Pull or push the bar to required position.
• Fix the locking clamp.
• Do the same procedure on the opposite
side.
6 mm allen key
Check that both anti tips have the
same length. The gap between the
anti tip wheels and the ground must
be max. 3 cm.
If the anti tip is positioned on the
outside of the main wheel radius, it
will interfere with curbs and stairs.
The anti tip should always be used
for the safety of the user.
6.11 adjusting arm
supports
• Turn the release handle to the side and
hold.
• Adjust the armrest to the required height
and release the handle. Lift or lower the
armrest slightly until it locks.
The arm pad and locking screw are
set in the middle position. This can
be adjusted to suit the user.
6.12 Cushions
Cushions are fixed and adjusted
on the wheelchair using the velcro.
