20
language:
English
model:
Netti I Comfort
Version:
November 2010
Netti Rullestoler
It is imperative to correctly set-up the
cushion in order to ensure good
seating comfort
The cushion covers are washable and
thereby reuseable. Follow the
instruction on the back of the cushion
for correct maintenance and washing
of the cushion.
6.13 adjusting the velcro
back
• Loosen the straps, and place the back
rest cushion so that user gets room for the
bottom and the integrated lumbar support
in correct position.
• Tighten the straps so that they follow the
curvature of the spine and gives a little
extra support at the top of the sacrum.
6.14 Foot supports
The evelating foot support is angle adjustable,
swingable and removable. It comes with height-
and depth adjustable calf support. The foot
plates are hinged, and can be angled in fixed
positions. As a standard the foot plates come
with a locking bolt which makes the plates
stronger. The bolt can be removed by using a
pair of circlip pliers.
Netti I has the following foot support
alternatives:
• Universal foot support
• Amputation support
See chapter 5 for pictures.
mounting of the foot support:
• Raise the support a few degrees.
• Fold the foot plates up.
• Hold the foot support in the angle on top,
and place it in the pull out piece in an
angle as shown in picture below.
• Swing the foot support inwards and push
slightly downwards until it goes into
locked position.
