21
Netti Rullestoler
language:
English
model:
Netti I Comfort
Version:
November 2010
When adjusting foot support in angle,
do not put the fingers in the adjusting
mechanism between the moving parts.
Height of foot plate:
The foot plates are stepless height adjustable.
• Unfix the adjustment wheel so that the
adjustment bar moves freely.
• Adjust the foot plate to required height,
then tighten the adjustment wheel as
shown in picture below.
angle of foot plate:
• Unfix the screw as shown below using an
Allen key.
• Adjust the foot plate to the required angle
and tighten the screw.
5 mm Allen key.
As accessory an adjustment wheel can be
used instead of a screw.
locking and releasing the foot plates
• The foot plates come with a locking bolt
which makes the plates stronger
• To lock the foot plates pull the plastic
lock on the right foot plate and place the
lock over the bolt on the left foot plate.
• To release the foot plate pull the plastic
lock and lift the right foot plate up.
While making the adjustment there
must be no load on the foot plates.
For outdoor use, there should be a
clearance of 4-5 cm between the
foot plate and the ground.
Never stand on the foot plates due
to the risk of tipping forward.
When adjusting foot support
in angle, be aware of squeeze hazard
between moving parts.
