26
language:
English
model:
Netti I Comfort
Version:
November 2010
Netti Rullestoler
Netti I Comfort has been successfully tested
according to the requirement of ISO 7176-19
using a combined wheelchair an occupant
restraint system W120/DISR developed by
Unwin Safety Systems. For further information:
www.unwin-safety.com
I
n front: Use hook or strap attachment.
Mount an “eye-bolt” in one of the holes in the
wheel frame bracket. Hook on a hook/carabine
hook in the “eye-bolt”
Item number 1 pair eye bolts with bushing:
21074
The angle of the straps should be 0-45
°
Netti I comfort has been crash
tested without any power kit etc.
If, at a later point of time a power
kit, stair climber etc is mounted
this must be dismounted if the
wheelchair is to be transported in a
car.
8. maNOEVERING
8.1 General techniques
The weight and balance of the chair
influences the manoevering ability of the
wheelchair. The weight, size and sitting
position of the user are also influencing
factors. Also the position of the wheels
will influence the driving ability. The more
weight placed over the main wheels, the
easier it is to manoevre. If heavy weight is
placed over the front castors, the chair will
be heavy to maneuvre.
Companion:
If the user is left alone in the wheelchair,
always lock the brakes and secure that the
anti tips are turned down.
Parking:
Increase the underneath support of the
wheelchair by moving the chair about 10
cm
backwards making the front castors turn
forward.
.
