Model:
NettI S
Language:
English
Version:
2020-08
16
My-Netti.com
ANGLE OF BEARING HOUSE
Correctly adjusted vertical angle of the
front fork is important to achieve proper
manoeuvring qualities of the wheelchair.
Unfix the two bearing house screws on the
outside of the frame enough to adjust the
eccentric nut on the inside.
Angle the bearing house, so that it is
90° relative to the ground, tighten the
screws well.
1 pc Allen key
The bearing house cannot be adjusted
in height.
Check the position of the anti tip.
6.5 SEAT HEIGHT AT THE
FRONT
The seat height depends on:
• Size of front castors.
• Size of front fork.
• Check the angle of the castor bearing
house.
6.6 SEAT HEIGHT AT THE
REAR
The seat height at the rear depends on:
• Size of main wheel.
• Position of main wheel.
Main wheel
Unfix the screws holding the wheel,
including washer and nut also including
the drum brake fixings for user brake, foot
pedal brake + cross bar. Mount it in required
position in the main wheel bracket.
Illustrations shows the main wheel mounted
to frame extension bracket which is
standard configuration.
2 pcs open-end spanner
When the seat heights changes ensure
that the main wheels are placed such
that the lower frame tube is parallel
with the ground.
The risk for tipping increases when the
main wheel is moved forward in the
main wheel bracket.
Check the position of anti tip.
Readjust the brakes.
Readjust the angle of the bearing
house.
