info@solidworks.com
info@solidworks.com
info@solidworks.com
Model:
NettI S
Language:
English
Version:
2020-08
20
My-Netti.com
Anti tips height is adjusted as follows:
• Unfix the 3 screws on the anti-tip pedal.
• Pull out or push in the vertical bar
• Fix it in correct height using an Allen key.
• Do the same procedure on the opposite
side
5 mm Allen key
.
Check that both anti tips have the
same length. The gap between the anti tip
wheels and the ground must be max. 30 mm.
The anti tip should always be used
for the safety of the user.
6.14 CUSHIONS
Cushions are fixed and adjusted on the
wheelchair using the Velcro.
It is imperative to correctly set-up the
cushion in order to ensure good
seating comfort.
The cushion covers are washable and
thereby reusable. Follow the instruction
on the back of the cushion for correct
maintenance and washing of the cushion
6.13 ANTI TIP
Netti S is always delivered with anti tips.
The anti-tips are to be activated in all daily
use. Always activate the anti-tip whenever
the wheelchair is left without attendant.
The anti-tips only need to be folded away
when obstacles are to be crossed.
Activate
( from fold away position)
• Step on the parking brake pedal and
lock.
• Pull the anti tip out / rearwards
• Turn it down 180°.
• It locks into position with spring tension.
Fold away:
• Step on the parking brake pedal and lock
• Pull the anti tip out /rearwards.
• Turn it up 180°.
• It locks into position with spring tension.
The anti tips are delivered adjusted
according to ordered main wheel size
in standard position.
Netti S seat
width pad,
allowing for
seat width
reduction
down to -
90 mm less
than the
wheelchair
seat width.
