Model:
NettI S
Language:
English
Version:
2020-08
38
My-Netti.com
11. TROUBLESHOOTING
Symptom
Reason/Action
Reference
in manual
The wheelchair
is going askew
• The angle of the bearing house might not be 90°
• Check that the front castors are fitted in the same height
• One of the brakes might be too tight
• The user are sitting very askew in the chair
• The user might be stronger on one side than the other
6.4
6.4
6.19
The wheelchair
is heavy to
manoeuvre
• The main wheel might be incorrectly mounted
• Clean the front castors and forks for dirt
• Too much weight over the front castors
(Adjust the point of balance by moving the main wheels
back)
6.6
8.8
The wheelchair
is hard to turn
• Control that the front castors are not fixed too hard
• Adjust the angle of the bearing house
• Heavy weight over the front castors
• Adjust the point of balance
6.4
6.4
8.8
The front
castors are
wobbling
• Too much weight over the front castors
(Adjust the point of balance )
• The front castors are not fixed properly
• Check that the front forks are fitted in the same height
• The angle of the bearing house might not be 90°
8.8
6.4
6.4
6.5
The main
wheels are not
rolling well
• Clean and grease the axel
6.6
The brakes are
not functioning
well
• Adjust the brake
• Check the distance between wheels and brakes
6.19
The wheelchair
feels ”shaky”
• Check screws and adjustment points in general
Please contact your dealer for information about authorized service facilities that
can give support if solution is not reached in this form.
When in need of spare parts, please contact your dealer.
When making changes affecting frame construction, contact dealer / manufacturer
for confirmation ahead of the fixing.
