Model:
NettI S
Language:
English
Version:
2020-08
My-Netti.com
43
*
Belts and harnesses:
must be height and length adjusted to give comfortable
support and safe positioning. Please be aware that the hip belt can be fixated in
many different angles and that the harness should not push the user down towards
the seat. Please ask a therapist to advice, to find the correct fixation point and
angle.
Mounting and some adjustments are described in chapter 5.02
*
Head support
: shall be height and depth adjusted to support the head.
The head support cushion should meet the lower middle of the head when the
user is slightly leaning backwards.
Adjustments are described in chapter - 6.19
Correct wheelchair size
: In general a wheelchair shall fit the user at the time of receiving
the wheelchair. This gives the user the best support and safety from day 1. However since
children are quickly developing and growing, we have prepared for Netti S for following the
growth in reasonable steps where the size to grow into is not unacceptable big.
Choose a neetti S with seat width that fits the user when the seat width pads are most
inward adjusted. When the user reaches the point where the max distance between seat
width pads is too small, a new wheelchair - one size bigger is required.
Netti S is delivered in 3 sizes:
Size 1
Max seat width 250 mm - starting from 160 mm
Size 2
Max seat width 300 mm - starting from 210 mm
Size 3
Max seat width 350 mm - starting from 260 mm
When the user has outgrown Netti S, a wide range of Netti wheelchairs with a wide range of
adjustable features and accessories are available.
Please see our homepage www.My-Netti.com
