Use the panel installation guide to verify proper system setup.
Wi-Fi DeviceLink
is a dedicated Wi-Fi module that is used to
connect Wi-Fi devices directly to the panel.
Features
• Dedicated wireless connection to the panel
• Secure encrypted wireless communications
• 5-year warranty
RE926RX Wi-Fi Device Link
™
Encrypted
IN
STALL
G
U I D E
I
Slot 2
Remove Backup Battery
Remove
AC Power
Install Wi-Fi DeviceLink in Slot 2
Backup
Battery
Slot 1
Slot 3
Align Retention Posts
Align Connector
Install
by first disconnecting AC power on the
panel. Next, remove the panel cover and
disconnect the backup battery connector.
Next, insert the Wi-Fi DeviceLink into
Slot
2
by carefully aligning the nylon retention
posts and the 8-pin connector while pushing
the card firmly until all posts are fully seated.
Reconnect the backup battery and AC power.
Finally, verify power and Wi-Fi LEDs are turned
on, and then re-install the panel cover.
Configuration is automatic
and no other
setup is required.
