ПРИВОДЫ LEVIGATO (СЕРИЯ LG)
|
ПРИВОДИ LEVIGATO (СЕРІЯ LG)
|
LEVIGATO DRIVES (LG SERIES)
61
PREPARATION FOR ASSEMBLY
2.2
TECHNICAL SPECIFICATIONS
PARAMETER
LG-600F
LG-800
LG-1000F
LG-1200
Maximum pulling force, N
600
800
1000
1200
Rated pulling force, N
300
350
400
450
Maximum door opening speed, m / s
0.2
0.15
0.2
0.15
Speed at the force 150 N (corresponds to the
maximum force of the balanced door leaf), m / s
0.185
0.128
0.185
0.128
Power
230 V (± 10 %) / 50 Hz
Power consumption at rated force, W
280
220
400
330
Maximum power consumption in standby mode, W
2
Maximum door area
*
, m
2
8.4
11.2
16.0
18.6
Maximum use intensity (at the door height
up to 2.4 m), cycles / hour
18
Maximum time of continuous operation at the force
150 N (corresponds to the maximum force of the
balanced door leaf)
20 minutes
Time of illumination after the door stops moving
This parameter is regulated in the range ~ 0 … 500 s;
default value is 30 s
Remote control
433.92 MHz / dynamic code /
maximum 64 remote controls
Protection class
I
Protection degree
IP20
Working temperature range,° С
− 20…+ 50
Weight (net), kg
5.0
4.7
5.5
5.3
Y
ATTENTION!
Technical specifications are valid at ambient tempe 20 º С (± 5 º С).
PART NO.
RAIL TYPE
MAXIMUM DOOR HEIGHT, М *
LGR-3300B
belt
2400
LGR-3600B
belt
2700
LGR-4200B
belt
3300
LGR-3300C
chain
2400
LGR-3600C
chain
2700
LGR-4200C
chain
3300
The sizes (overall, connection, mounting dimensions), which are ensured by the scope of supply,
are presented in
fig
. 1.
3.
PREPARATION FOR ASSEMBLY
Y
ATTENTION!
Please check the condition of all components and materials for their suitability and
compliance with the applicable regulatory documents in force. The applied instruments and ma-
terials should be fully intact and comply with the safety norms, standards and instructions in force.
Please, make sure that the door construction is suitable for the automation. Please, make sure
that there is enough space for the drive system and its operation.
* The data shown is for standard mounting of ALUTECH sectional garage doors.
Table 2 —
drives
Table 3 —
rails
