TARGO DRIVES (TR SERIES)
|
ANTRIEBE TARGO (SERIE TR)
|
COMMANDES TARGO (SÉRIE TR)
9
MOUNTING
0,5÷1,5m
Figure 6
Figure 7
Figure 8
• In order to avoid catching the manual control chain when the door is moving, and to avoid
impeding the movement of people and equipment, the lower part of the chain should be
fixed (
fig.
9) at a height of ~ 1.5 m.
• The chain should hang freely, should not be stretched (
fig.
10).
Figure 9
Figure 10
• Increase the length of the cords with handles according to the instructions for the extension
cords in the installation kit.
4.3
MANUAL RELEASE
Y
Manual release use is restricted to trained personnel only and only when the door is closed!
During manual mechanical release, the drive should be disconnected from the mains.
When the drive gearbox release is activated, uncontrolled movement of the door leaf is
possible, especially if the door springs are weak or broken; if the door leaf is not balanced.
Y
Only move the released door leaf at a moderate speed!
The gearbox of the drive can be disconnected from the drive shaft (released), for example, during
maintenance. In this case, the door leaf can be moved manually.
To perform the release, turn the release lever to the
OFF
position from the
ON
position (
fig.
11).
To return the drive into the engaged position, it is necessary to reverse the operation and return
the release lever to the ON position (
fig.
12).
