ALUZ
1170 North Red Gum Street, Anaheim, CA 92806
Phone: 800 921 2254 or 714 535 7900 | Fax: 714 535 7902 | info@aluz.lighting | aluz.lighting
©
ALUZ All rights reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
Installation Instructions
Page 1 of 11
9 / 1 / 2021 / Rev 0
Square
ZYZY
A1-ZYZY-SQR
Overview
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
Important Notice:
Verify correct luminaire was received with correct
color temperature, voltage, and wattage before cutting or installing.
ALUZ will not be responsible if incorrect luminaire is installed.
GENERAL FEATURES
Applications
Surface Mount Direct View
Lens
100% Frosted (No Pixelation: Line of Light)
Length
Built to Order:
Custom lengths up to 8’ (No Seams)
Specify Overall Length (Minimum: 2’, Maximum: 8’)
Example:
7’8” = One 7’8” luminaire (Custom Length)
Example:
3’2” = One 3’2” luminaire (Custom Length)
Example:
13’6” = 8’ + 5’6”
Example:
23’8” = 8’ + 8’ + 7’8”
Construction
Aluminum Extrusion
Weight
1.09 lbs per foot
Mounting
Mounting Plates (Sold Separately)
Listing
Dry, Damp, or Wet Location
UL1598, CSA C22.2#250.0
UL8750, CSA250
UL2108, CSA C22.2 #9
Driver
Integral (Driver on Board)
Temperature
Ratings
Operating / Startup: -20° to 48°C (-4° to 120°F)
Storage: -40° to 76°C (-40° to 170°F)
Installation Link
PRODUCT INFORMATION
• Lighting for direct view and accent lighting.
• Line Voltage 120-277V (UNV) integral drivers .
• Long life, energy effi cient LEDs.
• Choose from a variety of LED colors and whites.
• Can be ordered to specifi c lengths for when exact dimensions are known.
• Electric Hammer Drill
• 14.4 to 28 Volt Cordless Drill
• Phillips Bits
• Utility Knife
• Electrical Cord
• Marker
• Wire Stripper
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tape
• Laser Line or Chalk Line
INSTALLATION TOOLS REQUIRED
ELECTRICAL REQUIREMENTS
• Line voltage luminaires do not require a remote driver
• Maximum load per line voltage luminaire is 320 watts per circuit
ELECTRICAL
Dimming
0-10V, DMX, DALI
Maximum Run
(Class 1 Line Voltage
Integral Driver)
40’ (4W, 5W, 6W, 8W), 26’ (12W)
Luminaire Voltage
120V - 277V (UNV)
END VIEWS / DIMENSIONS
Dry or Damp Location
(No Visible Screws)
3.44”
1.87”
3.44”
1.87”
Wet Location
(Visible Screws)
