Secure them with 3pcs washer
Φ
6 and 3pcs wing nut.
Carefully install the glass tube by lifting up and inserting it
through the center hole in the upper plate. Ensure the black
silicone ring is attached to the lower edge of the glass tube as
illustrated above. Slide the glass tube through the hole of the
lower plate cover and onto the middle plate. Check and ensure
that the glass tube is positioned properly and is completely
covering the center hole of the middle plate.
STEP 6
STEP 7
9
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
silicone ring.
WARNING!
The black silicone
ring must be in place
prior to operating the
heater.
Black Silicone Ring
AA
BB
CC
Summary of Contents for GHP20
Page 1: ......
