PUD4146R1-0
For Assistance: support@alvaradomfg.com +1 (909) 591-8431
Page 17
EDM Installation and Maintenance Instructions
Testing Turnstile Functionality (Cont.)
Test
Procedure
Turnstile Response
Drop Arm
• Place a jumper across Pins 4 & 5,
EMROVR and GND, respectively.
EMROVR/GND
• Arms drop allowing passage
in emergency situations.
• Performs boot up sequence
and returns to normal
operation once jumper is
removed.
Optional Accessories:
• User Status and
Open / Close lights turn off.
Impact
• Provide an activation.
• Begin to rotate the arms in the
passage direction and block with
either your hand or leg.
• Buzzer sounds
• Arms reset two seconds
after obstruction has cleared.
Optional Accessories:
• User Status lights change
from yellow to flashing red.
• Open / Close lights change
from green to red.
• All lights reset 2 seconds
after obstruction is clear.
• Place a jumper across Pins 5 & 6,
GND and BDISABLE, respectively.
OR
• Arms drop allowing barrier
free operation.
• Returns to normal function
once jumper is removed.
GND/BDISABLE
