PUD4146R1-0
For Assistance: support@alvaradomfg.com +1 (909) 591-8431
Page 21
EDM Installation and Maintenance Instructions
EDM Utility
The EDM ships with the EDM Utility which allows adjustment of settings and tests turnstile functionality. The EDM
Utility is on a USB drive included with the turnstile. Copy the file from the USB drive to your laptop. There is no
installation required.
The tools required to use the EDM Utility are:
• Laptop computer
• RS-232 programming cable
• USB-to-Serial converter cable
1) Open the cabinet and identify the control board.
2) Connect the RS-232 programming cable to the J16 terminal on the control board. Refer to page 11 for location.
A) Use a USB-to-Serial converter cable if the laptop does not have a serial port.
3) Double-click the utility icon to launch the utility. This will bring up the EDM Utility main screen.
4) Select COM Port from the drop-down menu and click Open. [Fig. 15]
5)
All fields are populated with current settings.
• Select the check box "Customize Panel Movement" to enable modification of settings. [Fig. 15, Item#23]
• To check the current value of a parameter, click READ.
• To customize a parameter, enter a value in the text box and click SET.
NOTE
Depending on the computer, the COM port number may differ.
Fig. 15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Contact Alvarado technical support BEFORE changing settings
.
NOTE
See next page for setting descriptions.
