Page 4
For Assistance: support@alvaradomfg.com +1 (909) 591-8431 PUD4146R1-0
EDM Installation and Maintenance Instructions
This product is shipped with installation hardware. Make sure that no parts are missing or damaged before beginning
installation. If parts are missing or damaged, please stop the installation and contact Alvarado. Additional copies of
this installation manual can be found at www.alvaradomfg.com.
Parts List
Turnstile
(Qty 1)
• Socket Wrench
• 9/16" Socket
• Hammer Drill
• 5/8" Concrete Drill Bit
• Shop Vac
• #2 Phillips Head Screwdriver
• Precision Flat Head Screwdriver
• Torque Wrench (ft.-lbs.)
• Hammer
• Tape Measure
• Clear RTV Silicone
Tools Required
Tools required for Portable Base Turnstile installations are located in Appendix B - Portable
Base Turnstile
on page 26.
NOTE
Keys (per turnstile)
• Turnstile Lid Keys (Qty 2)
• Override Keys (Qty 2)
NOTE
Keys are taped to the turnstile arm.
Make sure to locate these keys prior
to discarding product packaging.
RS232 progamming cable is located
within the cabinet.
Anchoring Hardware
• Concrete Anchor Kit (Qty 1)
• Shim Kit (Qty 1)
Cables
• RS232 Programming cable (Qty 1)
Uncrating
The EDM has been packed for shipping to prevent damage to the unit. Two or more installers are required to
unload the EDM at the installation site. Once the turnstile cabinet has been placed in the installation location,
carefully remove the protective packing material from the sides of the cabinet.
(EDM-Square cabinet shown)
