Supervisor 3500 Installation Instructions
Page 26
For assistance: support@alvaradomfg.com +1 (909) 591-8431 PUD3673R1-1
Testing Lane Functionality
Perform the following turnstile functionality tests to validate basic turnstile operation. Tests are provided for Controlled Passage,
Free Passage, and No Passage modes.
The following is assumed (Controlled Passage mode tests only):
•
The access control system is operational and all access control wiring to the turnstile is connected.
•
Valid access cards are on hand for activating the turnstile.
CONTROLLED PASSAGE MODE
Unauthorized
Entry / Exit
Authorized
Entry / Exit
Unsecured Side
(Unauthorized Entry shown)
(Authorized Entry shown)
Secured Side
Unsecured Side
TEST
PROCEDURE
TURNSTILE RESPONSE
Enter the turnstile without authorization.
•
Unauthorized Entry / Exit alarm sounds.
•
Red stop icon flashes on the User
Status Display in the direction of the
violation.
•
Open / Closed Status Light turns red in
the direction of the violation.
•
Barriers remain closed.
Using a valid card, activate the turnstile.
Walk through the turnstile. Verify the barriers
close upon passage completion.
•
Authorized Entry chime sounds.
•
Green arrow icon illuminates on the
User Status Display in the entry / exit
direction, respectively.
•
Open / Closed Status Light is green in
the passage direction.
•
Barriers move to the open position, and
close upon passage completion or the
timeout period is reached.
Secured Side
