TAS12-AS1 & TAS12P-AS1 Installation Instructions
Page 10
For Assistance: support@alvaradomfg.com +1 (909) 591-8431 PUD3677R1-0
Loading Printer Paper (TAS12P-AS1)
The Zebra KR403 printer is compatible with several types of direct thermal paper. For typical seat locator/receipt
printing applications, Alvarado recommends the following product or its equivalent:
Manufacturer: Zebra (www.zip.zebra.com)
P/N: 10007008
Width: 3.125 in. (79.4 mm)
Thickness: 3.5 mil
Roll Length*: 645' (196.5 m)
Core Diameter: 1"
*Paper rolls up to 7" in diameter (roughly 885' of paper) may be used. Contact Zebra for information on custom paper
roll stock.
If you have questions regarding paper compatibility, contact Alvarado or Zebra Technical Support for assistance.
1. Power ON the TAS12P-AS1.
2. Open the printer box door.
Depending on the configuration ordered, the printer box door may open from the right- or left-hand side.
3. Insert paper roll as shown in [Figure 12]. The paper should feed from the back of the of the roll (closest to the
pedestal post).
4. Slide the paper up the feed ramp until it is grabbed by the printer. A blank ticket will be cut and deposited to the
printer bezel.
NOTE
Fig. 12
Loaded Printer Paper
(Shown with the printer box open from the right-hand side.)
