Olympian Chair
(Office Height)
Assembly Instructions
For model
CH300-40
Parts Included:
Tools Required:
Allen wrench
Important:
Keep screws loosely tightened during the assembly process.
Tighten them fully once chair is assembled or when instructed.
4
Place the back rest (
E
) face up on a clean, flat surface with
the attached brackets facing up. See
Figure 2
.
5
Position the seat (
F
) so that the holes are lined up with the
holes on the back rest brackets.
6
Use three metal bracket screws (
G
) in the middle 3-hole
metal bracket to attach the seat and the back rest. Leave
screws loosely tightened until all screws are in place.
7
Use four seat and back rest bracket screws (
H
) in the outer
back rest brackets to firmly attach the seat to the back rest.
Tighten all screws.
C
1pc Seat Post
D
1pc Seat Post Cover
F
1pc Seat
K
1pc Mechanism
G
3pcs Metal Bracket Screws
H
4pcs Seat and Back
Rest Bracket Screws
I
4pcs Mechanism Screws
J
2pcs Arm Width Adjustment
Knob and Washers
A
5pcs Casters
D
F
H
E
H
G
B
A
C
To Assemble:
Unpack and inspect contents to confirm you have all
pieces pictured.
1
Attach five casters (
A
) to the legs of the wheel base (
B
) as
shown in
Figure 1
.
2
Attach the seat post (
C
) to the wheel base and cover with the
seat post cover (
D
), with narrowest part at the top.
3
B
1pc Wheel Base
E
1pc Back Rest
Figure 1
Figure 2
L
2pcs Armrest
Page 1 of 2
