M1701_POS_Pro_Manual V1.0 2012-06-12
9
7.
SPECIFICATIONS
MODEL
P.O.S. Pro 600
INPUT
Capacity 600VA
Voltage
120V, 220V +/-25%
Frequency
50 or 60Hz +/-10% (auto sensing)
OUTPUT
Voltage (on battery)
Simulated sine wave at Line Input +/-5%
Frequency (on battery)
50 or 60Hz +/- 1Hz
DC Output
24V/1.5A (24VDC Printer cord)
Auto Voltage Regulation
AVR
±
13% of nominal (120V)
Transfer Time
2/4 milliseconds, including detection time
PROTECTION and
FILTERING
Spike Protection
480 joules, 2ms
Overload Protection
UPS automatic shutdown if overload exceeds 110% of
nominal for 60 second or 130% for 3 seconds.
Unit Input
Fuse or circuit breaker for overload & short circuit
protection
Short Circuit
UPS output cut off immediately or input fuse protection
BATTERY
Type
Maintenance-free, Sealed Lead Acid
Typical Recharge Time
6 hours (to 90% of full capacity)
Protection
Automatic self-test & discharge protection, replace
battery indicator
Back-up Time
20 - 30 minutes (depending on load)
PHYSICAL
Net Weight kg(lbs)
6.8 (15 lbs.)
Shipping Weight kg(lbs)
7.3 (16 lbs.)
Dimension (mm)WxDxH
97x320x135 (3.8” X 12.5” X 5.3”)
Input Inlet
Nema 5-15P power inlet
Output
5 X Nema 5-15R (3 output power, 2 surge protection
only) +1 DC printer power connector
ALARM
Battery Back-Up
Slow beeping sound (about 0.47Hz)
Battery Low
Rapid beeping sound (about 1.824Hz)
Overload
Continuous beeping sound
CONFORMANCE
Safety
cUL UL1778, CSA C22.2 and FCC Class B
Surge
IEEE C62.41 CAT. A
ENVIRONMENT
Ambient Operation
6,000 meters max. elevation, 0-95% humidity non-
condensing 0-40
°
C
Audible noise
<40dBA (1 meter from surface)
