7
Preparations for use
•
Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to
energize the refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
•
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
•
Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the
temperature inside the freezer compartment drops obviously, it indicates the refrigeration system is
working normally.
•
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user’s temperature setting. After the refrigerator is fully cooled,
put in foods, which usually need 2~3 hours to be fully cooled. In summer, when the temperature is high, it
takes more than 4 hours for the foods to be fully cooled (Try to open the refrigerator door as less as
possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and
leakage circuit breaker are normal. If vibration noises are produced due to the refrigerator contacting the
wall or if the wall gets blackened by air convection around the compressor, move the refrigerator away from
the wall. Setting up the refrigerator may cause jamming noise or image chaos to the mobile phone, fixed-
line telephone, radio receiver, television set surrounding it, so try to keep the refrigerator as far away as
possible in such case.
Functions
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the display panel
gets illuminated for 2s. When all the doors are close, the display gets extinguished automatically if no key
operation within 3 minutes. When the display is off, it will light up if any door is opened or any key is
pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display.
(refer to Child Lock for unlocking the keys)
Functions
Temperature setting
•
Fridge temperature setting
Press the Temp. Zone key to select the fridge zone, with the corresponding icon flickering, and then press
the Temp. key to adjust the temperature, finally press the OK/Lock to validate the above temperature
setting.
The fridge temperature setting cycles as following:
5
℃
→
6
℃
→
7
℃
→
8
℃
→
OF
→
2
℃
→
3
℃
→
4
℃
→
5
℃
；
OF refers to Fridge Off, and when OF takes effect, the fridge will stop cooling.
Take foods out of the fridge compartment before setting this function.
Cold storage temperature zone
Alarm icon
Temperature range of freezer
Fast freezer function
Child-lock function icon
Temperature setting icon
OK/Lock icon
Digital display area
LECO function icon
Vacation function icon
Smart function icon
Temperature zone selection icon
Function selection icon
