10
Target indicators
1) Numeric ranges of target:
IRON:
00-10
5 :
11-20
P-TAB:
21-40
ZN (1 )
41-60
10 :
61-75
25 :
76-99
NOTE: There are a wide variety of metals and no target can be identified for certain until
unearthed. This table is for general reference only.
2) Types of target:
IRON: It indicates that the target is probably iron.
5 : It indicates that the target is probably 5 or a nickel. Some small gold rings might
register within this range.
P-TAB: It indicates that the target is probably a pull tab of aluminium can. Some small
gold rings might register within this range.
ZN: It is indicated that the target is probably a coin of 1 or type of metal of zinc alloy.
Some medium sized gold rings might register within the category.
10 : It indicates that the target might be a coin of 10 . Some large rough gold items
might register within this category.
25 : It indicates that the target is probably 25 or a silver coin.
Tones
The detector comes with three tones for different types of metal. But the built in audio
identification system sound a unique tone for each of three categories of metal. This
makes it easier to identify the metal being detected. A low tone is for IRON, 5 , same as
for foil, bottle cap or nickels. A medium tone if ´´s for P-TAB, ZN, 1 (aluminium pull
tabs, zinc or copper items). A high tone is for 25 , same as for brass or silver items.
NOTES: When you set the detector to DISC or NOTCH mode, the detector sounds a
medium or high tone when it detects highly oxidized iron.
