4
The bike will be ready to ride and the LCD will activate showing Current speed, trip distance,
ODO, power and battery SOC. Turning the pedals for more than ¼ of a revolution will now
activate the motor.
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set to 0 when
mounting, dismounting and turn the bike off when leaving it unattended.
To set the assist levels, toggle with the + and – buttons
2.1.10
To avoid the use of a bicycle trailer or outboard bicycle.
2.1
Before each use
It is important you check your bike prior to each time you use it. Checks should include the following:
(If you do find any damage or problems, do not use the bike until the problem has been solved or
you have had the faulty item checked by an electric bike mechanic or your retailer).
2.2.1
Check the tyres for any visible damage.
2.2.2
Check the tyre pressure.
2.2.3
Check for any loose nuts, bolts or fixings. Check all folding mechanism clamps are
closed tight and locked.
DS23
Size
81mm × 48mm
Rated Voltage
36V
Screen Size
Installation Size
φ 22.2
Display Type
LCD Side-Type
Display Attribution
Colorful display
Support Modes
0/1 - 5/7/9
Com. Protocol
Uart/CAN
USB charing USB
Operating temperature
-20 ~ 60
℃
IP Level
IP65
