background image

 

 

  7

Igniting  failure, 
but  the  ignition 
stick  has  spark, 
and  slight  gas 
smell 
 

1.the air volume  too large, such as winter morning or 
just change new gas cylinder 
2. the cylinder pressure is not sufficient. 
3. The ignition needle install place is incorrect. 
4. The nozzle is blocked by debris 

1.

 

Reduce the air volume. 

2.

 

Check and replace. 

3.

 

The ignition needle should be 2-3 

mm above the fire mouth. 
4.

 

Remove  the  copper  nozzle  and 

remove debris. 

Success  igniting 
but  soon  go  off 
and alarm 

1.the fire needle shift or damage 
2.The electronic ignition controller is damaged. 

1, adjust or replace the fire needle 
2.Replace  the  electronic  ignition 
controller. 

Dark flame 

The fan blower failure. 

Repair the fan blower. 

Return flame 

Inappropriate air volume. 

Adjust the air flow 

Away  from  the 
flame 

Air flow too large 

Reduce air volume 

Keep lighting 
after catch a fire. 

Inappropriate placement of the ignition needle. 

The ignition needle should be placed 
in 2 - 3 mm above fire mouth. 

Temperature 
control failure 

Temperature controller failure 

Replace new thermostat 

 

7. Warning 

6.1 The installation

operation and maintenance must strictly according to the manual. 

6.2 

The gas cylinder should be connected with pressure relief valve which the factory provided. 

 

It is strictly forbidden to turn the gas cylinder upside down to prevent the residual liquid gas get into the 

gas system, in case the parts be damaged and cause security threat. 

Warning:  This  product  is  not  for  the  disables,  sensory  and  mental  disorders  or  whom  lack  of 

experience or knowledge  (including children).  

The oven power must be cut off when the baker leaving the working area. 
 

8. Maintenance 

8.1 Please coat both sides of the oven door hinge with oil once a week, in order to make the door hinge 

move smoothly and durably. 

8.2 Please clean up residues in the oven regularly (when the oven power off), and wipe the oven surface 

with dry cloth.  

8.3 Although the gas oven has common waterproof function, it is strictly forbidden to clean the oven 

with  running  water  or  spray  water,  in  case  the  electrical  components  breaks  down  or  cause  an 
electric shocks, even damage the oven! 

8.4 Check the electrical parts,  gas hose and all connectors regularly, if damaged should  be replaced 

promptly. 

 
 

9. Warranty 

9.1 The installation

operation and maintenance must be strictly according to the manual. 

Warning:  This  product  is  not  for  the  disables,  sensory  and  mental  disorders  or  whom  lack  of 

experience or knowledge  (including children).  

The oven power must be cut off when the baker leaving the working area. 

9.2  The  warranty  period is 12  months (from  the  date  of  purchase),  during  this  period, this products 

proves defective under normal use, the company will provide free repair and/or replacement of 

Summary of Contents for HLY-101E









Reviews: