2
3
ASSEMBLY, INSTALLATION AND MAINTENANCE INSTRUCTIONS
OF THE SHOWER ENCLOSURE SENSE 80 / SENSE 90
Version 2009
Delivery set:
1 – wall-mounted aluminum profile – 2pcs.
2 – side panel – 2pcs.
3 – panel profile – 2 pcs.
4 – door panels – 2 pcs.
5 – side plastic profile – 2pcs.
6 – magnet sealer – 2pcs.
7 – aluminum guide – 2pcs.
Fitting – screw plug (8pcs.), bolt screw 6mm (4 pcs.),
bolt screw 14mm (8pcs.), bolt screw 41mm (8pcs.)
INSTALLATION
1. Install tray into the intended location and align it
horizontally according to the level. Install siphon and
connect it to the drain pipe. Check water drain.
DRW.1.
DRW.2.
DRW.3.
DRW.4.
3. Assemble the screen without doors. Upper and
lower aluminum guide (No.7) and side panels (No.2)
are connected together with the help of self-drilling
screws. Insert rollers into the guides (8). Place the
assembled construction onto the tray and insert into
the wall-mounted profiles. Put decorative inserts
onto the glass profiles (panel profiles) (No.3). Fasten
the screen to the wall-mounted profiles with the help
of self-drilling screws. Fill in the joints with a sealer
outside and inside of the screen (see drw.2).
4. Install door handles and sealers onto the doors
(drw.4).
ATTENTION! After the assembly some time should
be given for the sealer to harden. It is prohibited to
use the product during 24 hours after the finishing of
the installation works.
1 – door panel – 2pcs.
2 – roller – 8pcs.
3 – fitting screw – 4pcs.
4 – inner door handle – 2pcs.
5 – outer door handle – 2pcs.
6 – sealing bushing – 4pcs.
7 – washer – 4pcs.
8 – decorative stopper of the door handle – 4pcs.
9 – side sealer – 2pcs.
2. Install wall-mounted profiles (No.1) at the distance
of 890 mm (for model SENSE 80 at the distance of
790 mm) from the corner to the center of the holes
of the installation. Fill in the joint between profile
and a wall with a silicone sealer (that meets the
standards of ph-neutrality, colorlessness, antifungal
action) (drw.1).
