© 1999 Amada
5
1.0
Introduction
The Amada dust collector is used for the
collection of airborne dust and particulate.
Whether in answer to the problem of air
pollution, or as part of a manufacturing process,
this collector provides highly efficient,
continuous, on-line dust collection.
The Ultra-Web II FR filter cartridges are the
heart of the Amada dust collector. These filter
cartridges help ensure that only clean air is
returned to the plant environment.
Technical and field support are always available
from your local Amada representative and
distributors.
Figure 2
Operational Schematic
1.1
Operational Explanation
(See Figure 2)
1.1.1 Normal Operation
During normal operation, contaminated air
enters the ADF4 dust collector through the inlet
and passes down and through the filter
cartridges. Dust is collected on the outside
surface of the filter cartridges. The clean,
filtered air flows through the center of the filter
cartridges into the clean-air plenum, where it
exits through the clean-air outlet.
1.1.2 Filter Cartridge Cleaning
Filter cartridges are cleaned automatically and
sequentially. The result is that only one filter
cartridge will be off-line at any given time.
Clean-Air Outlet
Dirty-Air Inlet
Normal Operation
Filter Cleaning
High
Pressure
Air Supply
Summary of Contents for ADF4
Page 22: ...Replacement Parts List...
Page 32: ...1999 Amada 33 Notes...
Page 33: ...1999 Amada 34 Notes...
