Controls and Adjustments
2110A PT Peanut Combine
Header Auger Adjustment
The header auger is manually height
adjustable. It can be raised or lowered to
help feeding in varied crop conditions. The
header auger adjustment functions as
follows:
•
If the header stalls often (but the
hydraulic system is operating properly),
the header auger may need to be raised
for additional crop clearance.
•
When the machine is new, it may be
desirable to raise the auger until the finish
of the auger has become polished for
less resistance moving the crop.
•
Under normal conditions, the header
auger is run at the halfway setting or
lower for more efficient conveyance of
crop and less rolling of vine material.
•
The header auger adjustment is
accomplished using the adjustable
bearing mount plates on each end of the
header.
•
The auger height is adjusted by
loosening the four outer bolts holding the
bearing mount plate and then turning the
top mounted adjuster screw to raise or
lower the auger.
•
It is important to keep the header auger
level, so both ends should be adjusted to
the same relative position.
•
Make sure all bolts are retightened after
the adjustments are made.
Outer bolts
Outer bolts
Adjust
Header auger adjustment
60
12/18/15
MAN143
Summary of Contents for 2110A
