2110A PT Peanut Combine
Performance
Harvesting Under Wet
Conditions
If equipped with dual cylinder drives, always
run on high in wet conditions. More
aggressive combine settings are typically
needed in wet conditions.
If water droplets are present on or under
peanut vines when harvested, the surfaces of
all components in the combine can become
coated in a layer of material composed of soil
and vine fiber. If it is not possible to lift the
windrows or wait until they dry before
harvesting, proceed at a ground speed lower
than normal and check frequently for buildup
of residue on the stemmer saws, elevator air
ducts and other surfaces subject to buildup.
After harvesting peanuts where buildup
occurs, it is important to:
1. Clean the stemmer saw with a wire brush
and scrape out the stemmer bottom.
2. Remove the elevator duct work and clean
thoroughly to remove buildup.
3. Clean the walker cylinder concaves.
4. Remove inspection cover located under
the first few disc separator shafts.
5. Using a flashlight, visibly inspect the area
in front of and around the first disc
separator shaft (front shaft). If any debris
is present, thoroughly clean this area. A
long stick with a hook or compressed air
is helpful in this cleaning.
6. When finished, replace inspection cover.
Failure to keep this area clean will
adversely affect peanut separation.
CAUTION
Do NOT perform the following items with
the combine or tractor running.
MAN143
12/18/15
67
Summary of Contents for 2110A
