1
2
3
4
5
6
Installing the Smart Lever Lock (Tubular)
Step.1
Tubular
P 2
Attach the inclined face of the latch
bolt in the closing direction of the
door, and then tighten the screw.
Align the power terminal of the locking
device hole horizontally, and then insert
the outer lever module connection bolt
into the door.
Attach the fixing bolt to the inner lever,
insert the module into the lock, then
tighten the fixing bolt clockwise using a
screwdriver, for the left and right side,
respectively.
Pull the lever in the direction of usage
(left or right) and operate the inner
lever down to check if the latch is
operating.
Open the cap at the end of the inner lever
and insert the batteries.
(Refer to Page 18 of the Instruction Manual)
After installing the door trim, adjust
it with a space bolt to adjust the
door shake.
