Function Settings
Register and Change Access Code
Button Functions
Beep
Beep
Beep
!
P 4
Step.2
Open Door
Double Lock
Access Code
Lock
Function
Settings
Outer
Side
Inner
Side
- The initial Access Code is
1234.
- The Access Code can be a minimum of 4 digits and can be up to 12 digits (digits from 0 to 5).
(If less than 4 digits or more than 12 digits are entered, the registration will be canceled with a
"beep" sound.)
- If there is no additional input within 15 seconds while entering your access code, the registration
will be canceled with a "beep" sound.
- When the registration mode is canceled, the existing Access Code is retained, and when the
new registration (changed code) is completed, the existing Access Code is deleted.
- The normal registration sound is a “ding” sound and the incorrect registration sound is a “beep” sound.
Add
Access Code
Delete
Access Code
Volume
Settings
Reset
Bluetooth
Master Key
Settings,
Input
Press and hold the
Function Settings
Button for 3 seconds
Wait
Inner Side
Outer Side
Enter the User Code,
and press
Enter the Access Code,
press
Enter the Access Code
again, and press
After pressing
the ③ button
and press
