Access
P 5
Step.3
- To prevent exposure of the Access Code,
enter false numbers before entering the
Access Code.
Ex) False numbers can be used both before
and after the Access Code.
(E.g.,
35
1234
000
)
Passcode Access
Use the flashlight on your cell phone to charge the solar panel
on the outer lever.
(About 60 seconds. The charging time may vary depending on the
amount and direction of the light.)
1
When the LED is lit and a buzzer rings, enter the access code.
(Please enter your Access Code in a fast manner since the power of
the solar panel is weak.)
2
How to Supply Emergency Power
Turn the battery cap on the inner lever counterclockwise.
(If it does not open well, use a coin.)
1
Remove the battery case cover after removing it from the lever.
2
Match the +, - polarities shown inside the battery case when
replacing, then close the cover.
3
When mounting in the lever, turn it clockwise and tighten it
with a coin.
Note that leakage or ruptures may occur when the battery is inserted in
the wrong way.
False
number
False
number
False
number
P a s s c o d e
4
How to Change Batteries
- After entering the Access Code +
- If you have entered the correct Access Code,
a “ding” sound occurs
- If you have entered an incorrect Access Code,
a “beep” sound occurs and the Access Mode
is terminated.
- After 5 failed attempts to enter the correct
Access Code, an alarm sound occurs and the
function is disabled for 3 minutes.
Safety Access
!
