background image

6

COOKTOP USE

The control knobs can be set to anywhere between HI and LO. 

Push in and turn to setting. 

Ceramic Glass (on some models)

The surface cooking area will glow red when an element is ON. 

Some parts of the surface cooking area may not glow red when an 

element is ON. This is normal operation. It will also randomly cycle 

off and back on again, even while on HI, to keep the cooktop from 

extreme temperatures.
It is normal for the surface of light-colored ceramic glass to appear 

to change color when surface cooking areas are hot. As the glass 

cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting, 

abrasions, and to condition the glass surface. Ceramic glass 

cooktop cleaner and a cooktop scraper are also recommended 

for stubborn soils. Do not use abrasive cleaners, cleaning pads, 

or harsh chemicals for cleaning. The Cooktop Care Kit Part 

Number 31605 contains all of the items needed to clean and 

condition your ceramic glass cooktop. Refer to the “Range Care” 

section for additional information.

IMPORTANT: 

To avoid permanent damage to the cooktop surface 

and to make soils easier to remove, clean the cooktop after each 

use to remove all soils.

 

Avoid storing jars or cans above the cooktop. Dropping 

a heavy or hard object onto the cooktop could crack 

the cooktop.

 

To avoid damage to the cooktop, do not leave a hot lid on 

the cooktop. As the cooktop cools, air can become trapped 

between the lid and the cooktop and the ceramic glass could 

break when the lid is removed.

 

For foods containing sugar in any form, clean up all spills and 

soils as soon as possible. Allow the cooktop to cool down 

slightly. Then, while wearing oven mitts, remove the spills 

using a scraper while the surface is still warm. If sugary spills 

are allowed to cool down, they can adhere to the cooktop and 

can cause pitting and permanent marks.

 

To avoid scratches, do not slide cookware or bakeware across 

the cooktop. Aluminum or copper bottoms and rough finishes 

on cookware or bakeware could leave scratches or marks on 

the cooktop.

 

Do not cook popcorn in prepackaged aluminum containers on 

the cooktop. They could leave aluminum marks that cannot be 

removed completely.

 

To avoid damage to the cooktop, do not allow objects that 

could melt, such as plastic or aluminum foil, to touch any part 

of the entire cooktop.

 

To avoid damage to the cooktop, do not use the cooktop as a 

cutting board.

 

Use cookware about the same size as the surface cooking 

area. Cookware should not extend more than 

1

/

2

" (1.3 cm) 

outside the area.

 

Use flat-bottomed cookware for best heat conduction and 

energy efficiency. Cookware with rounded, warped, ribbed, 

or dented bottoms could cause uneven heating and poor 

cooking results.

 

Determine flatness by placing the straight edge of a ruler 

across the bottom of the cookware. While you rotate the 

ruler, no space or light should be visible between it and 

the cookware.

 

Cookware designed with slightly indented bottoms or small 

expansion channels can be used.

 

Make sure the bottoms of pots and pans are clean and dry 

before using them. Residue and water can leave deposits 

when heated.

 

To avoid damage to the cooktop, do not cook foods directly 

on the cooktop.

Ceramic Glass Cooktop Cleaning (on some models)

Clean the cooktop after each use to help avoid scratches, pitting, 

abrasions, and to condition the glass surface. Ceramic glass 

cooktop cleaner and a cooktop scraper are also recommended 

for stubborn soils. Do not use abrasive cleaners, cleaning pads, or 

harsh chemicals for cleaning. The Cooktop Care Kit Part Number 

31605 contains all of the items needed to clean and condition  

your ceramic glass cooktop. Refer to the “Range Care” section  

for additional information.

IMPORTANT:

 To avoid permanent damage to the cooktop surface 

and to make soils easier to remove, clean the cooktop after each 

use to remove all soils.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the display panel. 

When any cooktop element on the console panel is turned on, 

the Cooktop On indicator light will glow.

WARNING

Fire Hazard

Turn off all controls when done cooking.
Failure to do so can result in death or fire.

REMEMBER: 

When range is in use or (on some models) 

during the Self-Cleaning cycle, the entire cooktop area may 
become hot.

A

B

C

A.  Surface cooking area
B. Cookware/canner
C. 

1

/

2

" (1.3 cm) maximum overhang

Summary of Contents for ACR4503SFS

















Reviews: