7
Oven Cooking
NOTE:
The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
Setting the Clock
1. Press the Clock pad.
• The clock time cannot be set if the control
is programmed for a bake, broil or timing
operation.
2. Set the correct time of day using the
▲
or
▼
pads. If the
▲
or
▼
pad is not pressed within 30 seconds, the program
will cancel. Press the Clock pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds.
THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the Timer pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the
▲
or
▼
pad until the desired time is displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. “0:00”
will appear in the display.
• If desired, press the Clock pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the Bake or Broil pads and the current
temperature setting will briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
Manual Clean Oven Control
(select models)
Using the Touchpads
• Press the desired pad.
• Press the
▲
or
▼
pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the
▲
or
▼
pad.
• A double beep will sound if a programming error occurs.
A
Bake
Use for baking and roasting.
B
Broil
Use for broiling and top browning.
C
Timer
Sets timer.
D
Clock
Use to set time-of-day clock.
E
Cancel
Cancels all operations except timer
and clock.
F
▲
(More)
or
Enters or changes time, oven
▼
(Less)
temperature. Sets HI or LO broil.
Note:
Four seconds after pressing the
▲
or
▼
pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the
▲
or
▼
pad, the function will be canceled and the
display will return to the previous display.
A B
C D E F
Summary of Contents for AGR4400ADW
Page 57: ...56 Remarques ...
Page 87: ...86 Notas ...