7
Step 8 – Install Window Seal Strip
Cut window seal strip (Item 15) to width of windows. Stuff
window seal strip between outdoor window glass and top
of indoor sash for tight seal to keep out heat and insects.
NOTE:
Air conditioner uses a system where water removed from
indoor air (condensate) is channeled to outdoor side of
unit. Sound of water heard during normal operation
comes from outdoor fan blade “slinger ring” that dips into
water and slings it onto outdoor coil. Water quickly
evaporates on the warm surface and improves air condi-
tioner efficiency.
Under normal conditions, unit can evaporate water as fast
as it is removed from indoor air. In very humid conditions,
however, excess water may drip off chassis. To avoid
dripping, install condensate drain cup (included with unit).
Insert condensate drain cup through
5
/
8
" hole in rear
center of outer case bottom. Then place ½" diameter
hose or tube on bottom spout of drain cup.
Step 9 – Return Chassis to Outer Case
Because window sash helps keep unit in window, make
sure window sash contacts outer case before reinstalling
chassis.
With assistance, replace chassis in outer case. Install
basepan clip (Item 16) into slot in outer case bottom and
secure to basepan using
3
/
8
" hex head screw (Item 2).
Replace front panel, air filter, and grille.
CAUTION
!
To avoid risk of personal injury or product damage
due to the weight of this device and sharp edges that
may be exposed:
•
Have someone help install unit. Air conditioner
weighs between 80 and 150 pounds (depending
upon model). Use proper lifting and carrying
techniques to prevent injury or strain.
•
Inspect location where unit is to be installed. Be
sure it will support the weight of the unit for an
extended period of time.
•
Handle air conditioner with care. Wear protective
gloves whenever lifting or carrying unit. Avoid sharp
metal fins on front and rear coils.
•
Make sure air conditioner does not fall during
installation.
A
A.
Window seal strip
Install window seal strip
A.
Outer case
B.
Place ½" diameter hose here
C.
Condensate drain cup
Install condensate drain cup (optional)
A
B
C
D
A.
Plastic front
B.
Basepan clip
C.
Basepan handle
D.
Chassis
Return chassis to outer case
A
C
B
B
