3
Removing Handles
Caution
To avoid personal injury or property
damage, hold handles securely while
removing.
1.
Nonextruded Handle Models
Remove top end cap. Remove door handle
insert by pulling up.
Extruded Handle Models
Remove trim using putty knife covered with tape.
2.
Remove door handles by removing screws.
Electronic Control Models
Remove electronic control panel by carefully
disconnecting ribbon cable from socket.
3.
Install door handles by reversing steps 1-2.
Removing Doors
Caution
To avoid personal injury or property
damage, two people must remove and
hang doors.
1.
Tape doors shut to prevent doors from opening
unexpectedly.
2.
Nonextruded Handle Models
Remove top door trim. Leave spacer in place
and slide trim away from end caps. Remove top
hinge covers.
Ice 'N Water
Dispensing Models
Remove top hinge covers.
All Other Models
Remove top hinge cover by lifting back and
sliding forward.
3.
Remove toe grille by lifting and pulling forward.
4.
Electronic Control Models
Remove bottom door closure screw. Unplug
wiring harness from high voltage box under
refrigerator. Unplug top hinge wire connectors.
Unscrew green/yellow earthing wire.
5.
Remove top Fresh Food hinge by removing
screws.
6.
Remove tape from Fresh Food door while
holding door securely.
7.
Remove Fresh Food door by lifting while
opening.
Electronic Control Models
Slide wiring harness through slot in bottom
door hinge bracket as door is raised.
Summary of Contents for sbde520tw
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ...52 PartNo 10897906 Printed in U S A 1997AmanaAppliances Amana Iowa52204 ...