6
Introduction
EN
The Epoch is a floor sanding machine. It can also be used for polishing, buffing and stripping. The machine can be used on wood, vinyl, terrazzo or cement floors.
CAUTION:
Your equipment may be inappropriate on some installations. Always consult with the flooring manufacturer on the proper
installation, preparation, and finishing of their product. Determine suitability of your equipment in preparing the product.
Model
07233A
EPOCH HD 16"
with HydraSand
07237A
EPOCH HD 16"
without HydraSand
07233C
EPOCH HD 16"
with HydraSand
(CSA)
07234A
EPOCH HD 20”
with HydraSand
07238A
EPOCH HD 20”
without HydraSand
07234C
EPOCH HD 20”
with
HydraSand (CSA)
Voltage (Volts)
230
230
230
230
230
230
Frequency (Hz)
60
60
60
60
60
60
Current (Amps)
14
14
14
15
15
15
Power (HP)
2.5 (1.86 kw)
2.5 (1.86 kw)
2.5 (1.86 kw)
2.5 (1.86 kw)
2.5 (1.86 kw)
2.5 (1.86 kw)
Pad Driver
Diameter (in)
16 (401mm)
16 (401mm)
16 (401mm)
20 (508 mm)
20 (508 mm)
20 (508 mm)
Pad Speed (rpm) 175 or 300
175 or 300
175 or 300
175 or 300
175 or 300
175 or 300
Cord Length (ft)
50 (15.2m)
50 (15.2m)
50 (15.2m)
50 (15.2 m)
50 (15.2 m)
50 (15.2 m)
Weight (pounds)
Machine only
120 lbs (54 kg)
Machine only
120 lbs (54 kg)
Machine only
120 lbs (54 kg)
Machine only
120 lbs (56 kg)
Machine only
120 lbs (56 kg)
Machine only
120 lbs (56 kg)
Machine with weights
145 lbs (66 kg)
Machine with weights
145 lbs (66 kg)
Machine with weights
145 lbs (66 kg)
Machine with weights
150 lbs (68 kg)
Machine with weights
150 lbs (68 kg)
Machine with weights
150 lbs (68 kg)
Machine with weights
& HydraSand
158 lbs (72 kg)
Machine with weights
& HydraSand
158 lbs (72 kg)
Machine with weights
& HydraSand
158 lbs (72 kg)
Machine with weights
& HydraSand
169 lbs (72 kg)
Machine with weights
& HydraSand
169 lbs (72 kg)
Machine with weights
& HydraSand
169 lbs (72 kg)
Extension Cords (230V)
Use only an approved extension cord with two main conductors and one earthing conductor.
WARNING:
If you use an extension cord, use an extension cord with minimum wire size 10 AWG. Do not use an extension cord longer
than 50 ft. Do not join two extension cords.
WARNING:
Do not cut, remove, or break the ground terminal. Do not try to fit a three-terminal plug into a receptacle or connector body
that does not fit the plug. If the receptacle or connector body does not fit the plug, see your Authorized person to make
the connection.
Electrical Connection Instructions (230V)
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the
risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate oulet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with qualified
This product is for use on a nominal 230 volt circuit and has a grounding attachment plug that looks like the plug illustrated in Fig. 12. Make sure that
the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.
WARNING:
To prevent possible electric shock, protect the machine from rain.
Keep the machine in a dry building.
WARNING:
To prevent possible electric shock, always use a 3-wire electrical
system connected to the electrical ground. Consult your electrical contractor.
WARNING:
Do not cut, remove or break the ground pin.
If the outlet does not fit the plug, consult your electrical contractor.
WARNING:
Have worn, cut or damaged cords replaced by an authorized service person.
Instructions for connection to the power supply and the electrical ground.
Figure 12
Grounded
Outlet
Grounding
Pin
Grounded
Outlet
Box
electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug
provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Summary of Contents for American Sanders Epoch HD
