19
OPERATION
The fireplace can be operated either by the switches located on the left bottom of the fireplace
unit or by supplied remote control.
Plug the fireplace into a 15 Amp wall socket.
1
、
Press key
. Press for the first time
，
heater work at 1900W, indicator
lights red.
Press for the second time, heater work at 950W
，
indicator
lights blue. Press for the
third time, the heating element turns off, indicator
extinguishes.
Note: after the heating elements are turned on manually, the heating elements work but
are not controlled by the temperature sensor.
2
、
Press key
. Press for the first time and the charcoal and flame is in the highest
brightness. Press for the second time ,the charcoal and flame is in medium brightness.
Press for the third time ,the charcoal and flame is in low brightness. Press for the fourth time ,
the charcoal and flame goes out. Then it circulates in turn.
MANUAL OPERATION
