11
1. Product is fixed with fending bars and panels
on the left and right side.
2. Take off the fending bars and panels if you
want to view the fire from three angles.
3. Fix back the fending bar after the panel is
removed.
4. Remove the framing plates from the fireplace
and fix them as the picture shows.
Note: After removing framing plates on the left
and right sides, screw back the screws.
INSTALLATION
The TRU-VIEW-XL models are designed to be built-in and allow for the finishing material (drywall,
stone, tile, etc) to be built right down to the glass edge.
The rough wall opening size of the fireplace:
W(
＂
) D(
＂
)
H(
＂
)
50-TRU-VIEW-XL 53 3/4 14 3/4" 27 1/8
60-TRU-VIEW-XL 63 3/4 14 3/4" 27 1/8
72-TRU-VIEW-XL 75 3/4 14 3/4" 27 1/8
fending bar
fending panel
40-TRU-VIEW-XL 43 34 14 3/4" 27 1 8
/
