15
3. After the fending panel is removed, screw
back the bar.
4. Remove the framing plates from the fireplace
and fix them as the picture shows.
Note: After removing framing plates on the left
and right sides, screw back the screws.
Installation for Front and Left Side
Viewing
1. Install the fireplace where the right side is
close to a wall, and you want to view the fire
from front and left side, take off the fending
panel on the left.
5. Make an opening for the fireplace according
to requested measurement.
2. Unscrew 7 screws on the right side that fix
the fending bar and panel and then take off the
fending bar and panel.
