NOTE:
1.
Select a location that is not prone to
moisture and is locates at least 0.91
m or 3 feet away from combustible
materials such as curtains or drapes,
furniture, bedding, paper, etc.
2.
Using a spirit level select a
position in which to mount the
fireplace horizontally.
3.
Check the wall to ensure there is no
wiring, pipe wires etc. in the area to be
drilled. Drill 8 or more pilot holes
depending on the size of the unit
purchased, (8mm diameter & 40mm
depth) using a suitable size drill bit
and insert the wall plugs into the pilot
holes.
4.
Remove the hanger from the
fireplace by removing the screws.
See image above.
Due to the many different materials used to build walls, it is highly recommended that you consult your local builder before you install this
fireplace on a wall.
As it appears in your manual:
WARNING: Be sure that the bolts
have been properly anchored to
withstand the weight.
!
5.
Fasten the hanger to the wall.
See image above.
