Amantii Blt-in-38, Installation And Operating Instructions Manual

INSTALLATION OVERVIEW

NOTE: bEFORE yOU INSTALL

SITE SELECTION

Review and consider all of the 

following conditions for

installation:

• Dimensions of the unit

• Unit requires a minimum of two (2) 

wall studs in order to ensure a secure 

installation.

Two possible installation 

methods:

• Built-In (page 10)

• Wall Mount (Page 12)

Ensure  the  power  cord  is  not  in

-

stalled so that it is pinched or 

against a sharp edge and ensure 

that the power cord is stored or se

-

cured to avoid tripping or snagging 

to  reduce  the  risk  of  fire,  electric 

shock or injury to persons.

Construction  and  electrical  out

-

let  wiring  must  comply  with  local 

building codes and other applica-

ble  regulations  to  reduce  the  risk 

of fire, electric shock and injury to 

persons.

A 15 Amp, 120 Volt circuit is required.  

a dedicated circuit is preferred but not 

essential in all cases. 

1. Select a location that is not suscep

-

tible to moisture, dust and is away from 

high traffic locations and things that 

many catch fire or block openings such 

as drapes, pillows, furniture etc.

2. If possible, select a location near an 

existing electrical outlet for ease of 

electrical hook up.

3. Remove fireplace, front, fireglass 

media, and all hardware from box and 

remove all packaging related materials 

prior to installation. (Figures 1,2,3,4)

4. Plug in the unit to ensure the LED 

lights are working correctly. (See page 

15)

5. Store the fireplace in a safe, dry and 

dust free location until you are ready to 

install the fireplace.

WARNING:

ADDITIONAL HARDWARE 

MAy bE REqUIRED:

• Wall Mount Method: 

Approx. Twelve (12) 6” Wood screws.

• Built-In and Wall Mount Methods: 

Plastic wall anchors where studs are not 

available.

8