01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
HARDWIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified service person should service and
repair this electric appliance.
If it is necessary to hardwire this appliance, a qualified electrician must remove the cord connection, and wire the
appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes, if hardwired.
1. Test the unit before removing the cord.
Remove the cover plate from the back top right corner of the appliance by removing the four screws, as shown below.
Unscrew and remove power cord.
2. Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the neutral wire into “N” and
the ground wire into “G”.
3. Return the cover plate to the back top right corner and screw the four screws back in to fasten the plate.
