15
OPERATION
Plug the fireplace into a 15 Amp wall socket.
MANUAL OPERATION
Plug the fireplace into a 15 Amp wall socket.
The fireplace can be operated either by the touch panel located on the left front top side of
the fireplace, or by supplied remote control.
The fireplace can be operated either by the touch panel located on the left front top side of
or by supplied remote control.
The fireplace can be operated either by the touch panel located on the left front top side of
1. Press to turn on and off the fireplace.
2. Press to adjust the flame’s brightness. There are 7 brightness levels (L5 – L4 - L3 –
L2 – L1 – L0 – L6).The indicator light turns off automatically leaving it not operated within
10 seconds.
3. Press to adjust the ember bed brightness. There are 12 brightness levels (D4 – D5
– D6 – D7 – D8 – D9 – DA – DB – D0 – D1 – D2 – D3).
4. Press to set the turn-off time, 30min-1h-2h-3h-4h-5h-6h-7h-8h-t0. The indicator light
turns off automatically leaving it not operated within 10 seconds. The timing turns off
when is pressed.
5. Press to turn on and off the heater in its AUTO mode. The setting temperature
switch through 59
℉
- 61
℉
- 63
℉
- 64
℉
- 66
℉
- 68
℉
- 70
℉
- 72
℉
- 73
℉
- 75
℉
- 77
℉
- 79
℉
-
81
℉
- 83
℉
-
℉
in Fahrenheit or 15
℃
-16
℃
-17
℃
- 18
℃
- 19
℃
- 20
℃
- 21
℃
- 22
℃
- 23
℃
- 24
℃
- 25
℃
- 26
℃
- 27
℃
- 28
℃
-
℃
in Celsius. The temperature setting mode will be
closed automatically if leaving not operated for 5 seconds.
6. When the heater is on, press the for 5 seconds to switch between Celsius and
Fahrenheit.
