HARD- WIRE INSTALLATIO
Turn off the appliance completely
person should service and repair
If it is necessary to hard-wire th
cord connection, and wire the ap
This appliance must be electrica
if hard-wired. In the absence
ELECTRICAL CODE in Canada
CODE in the United States.
1. Remove the cover plate from
as shown below. Unscrew an
2.
Attach the wiring to the junctio
neutral wire into “N” and the g
3.
Return the cover plate to the le
25
LATION
pletely and let cool before servicing. Only a qu
repair this electric appliance.
wire this appliance, a qualified electrician mu
he appliance directly to the house hold wiring.
ctrically connected and grounded in accordan
ence of local codes, use the current CSA
anada or the current ANSI/NFPA 70 NATIO
e from the left side of the appliance by removin
rew and remove power cord.
ction block. Please make sure the live wire goes
he ground wire into “G”.
the left side and screw the two screws back in t
y a qualified service
n must remove the
iring.
ordance with local codes,
CSA C22.1 CANADIAN
ATIONAL ELECTRICAL
moving the two screws,
goes into the “L”, the
ck in to fasten the plate.
Summary of Contents for SYM-100-B
Page 32: ...EXPLODED VIEW 32 ...
