<FLAME> stop at the current location, adjusted speed the process of
blinking display (as
dimmer lights flicker frequency ), do not adjust flame speed then the
is brighten up.
4. Press <HEAT> button, process of operations in accordance with LOW-HIGH-OFF-LOW ... ...
status, between the cycle of low-power to high-power and then off. Press one <HEAT> button,
when
micro-light is on low-power status. Another press <HEAT> button, when
full-time
bright is on high-power status. Then press <HEAT> button, when
dark the heater is power off.
Note, before the heater emits heat or after it stop producing heat, the hot air outlet may output air for
10 seconds. This is designed for protect circuit, and it's not spoiled.
5. Power off the electric fireplace when you leave it for a long time.
6. The two alkaline battery must be removed from the appliance before it is scrapped.
7. The alkaline battery is to be disposed of safely.
