11
INSTALLATION-WALL MOUNT
1.
Select a location that is not prone to
moisture and is located at least 0.91 m
or 3 feet away from combustible
materials such as curtains or drapes,
furniture, bedding ,paper, etc.
2. Referring to Fig. 1 below select a
suitable position in which to mount the
heater horizontally
–
use a spirit level to
achieve this.
3. Check the wall to ensure there is no
wiring, pipe wires etc in the area to be
drilled. Drill 8 or more holes (8mm
diameter & 40mm depth) using a
suitable size drill and put the wall plugs
into the holes.
4. Take out the hanger from the fireplace
by unscrew the screw. Referring to
Fig.2.
5.
Referring to Fig. 3
，
fix the hanger to the
wall.
6.
Referring to Fig. 4
，
avoid fireplace to
move, use screw fix fireplace to wall.
Warning! Always ensure the fireplace
is at least 350mm above the floor!
Be sure that the bolts have been fixed
firmly enough to withstand the
weight
！
Fig. 1
Fig. 2
Fig.3
Fig. 4
Summary of Contents for WM-BI-26-3623
Page 19: ...19 EXPLODED VIEW...
